Replacement D2 Ballast for D2R/D2S HID systems The low cost alternative of OEM ballasts! For Replacement of Hella or Philips Ballast - CE Certified. Ballast is matched with Hella's ballast, and OEM D2S/D2R bulbs can be used on this ballast without any cutting. 35W Highest quality Longer life Easy to installation CE Approved Notice: Look at this connector on the left, and the picture of ...
Part No: AGT-D2-BLST
Replacement D1S Ballast - Waterproof and shockproof - NOT OEM! NOT DIRECT FIT! (NOT OEM - This is aftermarket - Splicing Required for installation! We cannot stress this enough) ...
Part No: D1-universal-ballast
Designed to allow you to install HID bulbs on your factory headlights: SOLD AS A PAIR, You get TWO H7 - FOR VW JETTA MK5, VW Golf V (with Hella lamp, not Visteon) and most VW Toran. VW Rabbit If you have - Visteon headlights, please make note. This model does not have the slit - Please look at the picture (Notice no slit)   ...
Part No: 2x SG-BH20
This is our premium Relay with built in flickering plugs that will prevent your car or truck from flickering and getting dash lights. This relay was specially developed for vehicles with poor electrical systems or for new vehicles with computer controlled light switches which can cause flickering and dash light out warnings. This relay will solve the problem of 99% of vehicles with these ...
Are you having problems with your HID kit? HID conversion kit wiring relay harness for vehicles with poor battery, alternator, or heavy draw on power from stereo's or any low voltage issues. This wiring allows you to get power from the battery directly instead of the connector for the headlight bulb. PLEASE SPECIFY HEADLIGHT BULB SIZE IN NOTES DURING CHECKOUT SO WE CAN GET YOU THE RELAY WITH ...
Required for some models of Mercedes/Audi and Saab which use H7 bulbs. Typically all Mercedes 2006+ Will require this as well as other euro vehicles from many manufactures. Made from Metal SOLD AS A PAIR!   ...
Part No: 2x H7-MB-ADPT
One x  D2S/D2R Type plug adapter. This wire allows you to plug a standard ballast to a D2 type bulb. Round bottom fits perfect on all D2R and D2S bulbs OEM and aftermarket. Connects to Amp type ballast connector.   ...
Part No: D2-PLG
Genuine Original OEM Made in Germany BOSCH / AL xenon light ignition element / bulb igniter (Ignition Element Unit). Manufacture refurbished like new - May have scratches - Tested and Approved. Bosch Igniter P/N 1 307 329 059 or 1 307 329 058 (3 PIN) or 1 307 329 080 Please notice this unit has 3 PIN connector Fitment can include: 2006-2008 VW Golf GTi GEN 5 2005-2008 VW Jetta GEN5 ...
Part No: BOSCH-OEM-IGNT-3P
Advanced Can-Bus Ballast designed to prevent flickering, dash errors and lighting problems common to normal HID ballasts. Has been tested with many vehicles and found error free, however, some vehicles still may not respond. One of the best ballasts on the market!   ...
Part No: X6-v2-55w-canbus-ballast
  • Volume discount
  • 7.08: -$32.48
Used on H1 type bulbs on the headlights of the CRV 2002-2006 Acura RSX 2002-2009 Honda Prelude 1997-2001 Civic with H1 My fit other Honda cards we well. Required for these models for the HID installation. ...
Part No: 2x SG-BH27
Original Equipment (OEM) Replacement HID Ballasts For Mitsubishi / Acura / Honda / Mazda Xenon / HID headlight ballast. These ballasts come original equipment on HID equipped vehicles such as the new Acura TSX, TL, RL, Mazda 3, Honda S2000 to name a few. These high quality ballasts feature an all aluminum casing and braided steel bulb connector cables for durability. They have a 12V Input and ...
Part No: HND-OEM-BLST
Designed to allow you to install HID bulbs on your factory headlights: SOLD AS A PAIR, You get TWO H7 - FOR VW JETTA MK5, VW Golf V (For Visteon Headlights (Possible)) and most VW Toran. VW Rabbit If you have - Visteon headlights, please make note. This model does have the slit - Please look at the picture (Notice the slit)   ...
Part No: 2x SG-BH21
Wiring harness to be used with bi-xenon bulbs. Will not work with standard single beam or single beam with halogen HID bulbs. It is only designed to work with HID Bixenon bulbs that shift the light for the low/high beam operation. Above is the the plug used to connect your bi-xenon wiring to your bi-xenon bulb. The above wire controls the high/low beam operation. We offer this wiring in two ...
This is type 3 similar to our other model but with different design. We recommend you check your OEM bulb adapter to confirm it looks like this. These are HID adapters required for the HID installation on any E39 1996-2000 and Mercedes High Beam on some models. Allows you to mount the HID bulb to your headlight. E39 was made between 1996-2000 in the USA. Your factory headlight bulbs are ...
Part No: 2x SG-BH09
Required for the installation of HID on the E39 2001-2003  * May fit some 1999 and 2000 also, check your bulb socket. Allows you to mount the HID bulb on your OEM HEADLIGHT. Works on the OEM H7 headlights Sold as a pair   ...
Part No: 2x SG-BH07
This bulb adapter is for BMW E46 with factory halogen H7 bulbs who want to fit D2S/D2R/D2C OEM HID bulbs to their vehicle. The adapter is custom fit for OEM D2 bulbs and fits onto your factory halogen headlight. Sold as a pair   ...
Part No: 2x SG-BH05
Genuine Original OEM Made in Germany. May have scratches from handling. BOSCH / AL xenon light ignition element / bulb igniter (Ignition Element Unit). Bosch Igniter. Tested, works like new! Max. 30KV /85V AC. 3525Nom. Please notice this unit has 2 PIN connector - Check your model please! This listing is for 2 PIN only. May or may not have mounting tabs. Pictures shows with no mounting tabs. ...
Part No: BOSCH-OEM-IGNT-2P
Pair of wire extensions for HID/Xenon kits. Uses AMP type connector that is used on 99% of HID kits on the market. This allows you to mount your ballast farther away from the bulb. ...
Part No: 22-RLY
BMW E39 5 Series 1999-2003 and 3 Series HID D2S/D2R/D2C Bulb Adapter Works on the OEM H7 headlights but for customers who want to mount OEM D2 (D2S D2R D2C) type bulbs onto their headlight. Only works with those bulbs D2 series. Sold as a pair   ...
Part No: 2x SG-BH08
Required for all BMW E46 HID installation. This adapter allows you to fit the HID bulb in place. Sold as a pair   ...
Part No: 2x SG-BH03
H7 bulb spacer used on some cars with H7 bulbs to mount HID bulbs onto the car. SOLD AS A PAIR! ...
Part No: 2x SG-BH29
We have HID kit input wires for various bulb types. This is the wire that plugs into your vehicle connector, while the other end connects to your HID ballast. ...
Advanced Can-Bus Ballast designed to prevent flickering, dash errors and lighting problems common to normal HID ballasts. Has been tested with many vehicles and found error free, however, some vehicles still may not respond. One of the best ballasts on the market!   ...
Part No: X6-v2-35w-canbus-ballast
  • Volume discount
  • 8.26: -$27.48
Pair of HID adapters for the new MK6 vehicles produced after 2009 2010 2011 Jetta and GTI by VW. Some of these vehicles including the Golf and Jetta and possible other models may require these adapters for the installation of a HID KIT. Sold as a pair   ...
Part No: 2x SG-BH23
These are HID adapters required for the HID installation on any E39 1996-2000 and Mercedes High Beam on some models. Allows you to mount the HID bulb to your headlight. E39 was made between 1996-2000 in the USA. Your factory headlight bulbs are mounted in a special adapter. For this reason these HID adapters are required. BMW X5 2002-2003 - Certain Models may require this adapter for HID ...
Part No: 2x SG-BH06
Required for all BMW E46 HID installation. This adapter allows you to fit the bulb to your housing easily. Sold as a pair.   ...
Part No: 2x SG-BH04
Required for installion of HID on some HONDA Odyssey models. May fit other cars as well. FOR H1 - HONDA ODYSSEY(OLD) + Honda CRV (2005-2006)  + Honda RSX + Civic Type R S, Lancer JDM with H1 Includes: 1 Pair of plastic adapters as shown   ...
Part No: 2x SG-BH26