LED Decoder / Canceller modules that install between LED kit with H11, H9, or H8 type connectors Designed only for H13 / 9008 Type Plugs (MALE / FEMALE)     Connects between the LED kit and the vehicle connector     Adds an additional layer of capacitors and voltage regulation cleaning the power delivery to your LED Kit     Fixes Flashing ...
Part No: 2x LED-DECODER-H13
Add these 50W resistors to your HID wiring to prevent many problems such as Dash Lights, Warning lights or Flickering. The only solution for: BMW, Mercedes, Dodge, Chrysler vehicles. Must install one end on GROUND and one end on the LOW beam POSITIVE wire. Can be installed on exisiting relays or the wires of existing HID kits. Requires stripping some wire off your HID wiring and electrical ...
Part No: 2x 50W-RSTR
Places a load on the vehicle - so the vehicle thinks there is a halogen bulb still in place Add these 50W resistors to your HID wiring to prevent many problems such as Dash Lights, Warning lights or Flickering. The only solution for: BMW, Mercedes, Dodge, Chrysler vehicles. What it will work with: ALL HID Kits - Plug it before you plug in the HID Ballast Plug 9006, 9005, 9012 ...
Part No: 2x 50W-RSTR-9006
LED Decoder / Canceller modules that install between LED kit with H11, H9, or H8 type connectors Designed only for H11 / H9 / H8 / H16 OSRAM Type Plugs (MALE / FEMALE)     Connects between the LED kit and the vehicle connector     Adds an additional layer of capacitors and voltage regulation cleaning the power delivery to your LED Kit     ...
Part No: 2x LED-DECODER-H11
You purchased an HID or LED kit and your lights flicker / flash / or do not stay on? Chances are your vehicle has a CANBUS system which monitors the light bulb sockets and thinks your bulbs are out. HID and LED do not put the same load on the vehicle as regular halogen bulbs. Designed For Vehicles with 9007 connectors / Bulbs 2 pieces (a pair) of 9007 Type Error Fixer / Warning Canceller / ...
Part No: 2x 50W-RSTR-9007
Fixes error code or fast blinking issues related to the low current draw when using LED/HID kits. This product is designed to prevent flickering and bulb out messages. Features: 60W Resistor circuit Capacitor circuit Aluminum Heatsink Plate Heat Protected wiring Common solutions to: - Bulb Out - Headlight warning - Strobe type flashing after installing an HID or LED kit How it works: ...
Part No: 2x H11-60W-RSTR-CAP
You purchased an HID or LED kit and your lights flicker / flash / or do not stay on? Chances are your vehicle has a CANBUS system which monitors the light bulb sockets and thinks your bulbs are out. HID and LED do not put the same load on the vehicle as regular halogen bulbs. Designed For Vehicles with H13 connectors / Bulbs 2 pieces (a pair) of H13 Type Error Fixer / Warning Canceller / ...
Part No: 2x 50W-RSTR-H13
LED Decoder / Canceller modules that install between LED kit with H11, H9, or H8 type connectors Designed only for H11 / H9 / H8 / H16 OSRAM Type Plugs (MALE / FEMALE)     Connects between the LED kit and the vehicle connector     Adds an additional layer of capacitors and voltage regulation cleaning the power delivery to your LED Kit     ...
Part No: 9005-LED-DEC