1157 Type - Single Contact ...
Part No: 2x 1157-FLASH-R
Not Compatible with 3157 CK - See diagram pinout to see what this means; Some vehicles (rare) are 3157 CK and will result in fuses being burned
Hyper Flashing can occur when you install LED on turn signal; Additional purchase of resistors maybe required
3157, 3057, 3457, 4157
White for Tail Light or DRL
Amber on Bright Mode for Turn Signal
Best for Turn Signal where Amber is needed for ...
Part No: 2x 3157-100W-A-W
GENSSI best performing LED Technology. This 80W LED give you breathtaking brightness never seen in any other 3157 bulb on the market.
Flickering / Fast Flashing will happen on almost all vehicles if you install these on your turn signal. Solution? 50W resistors wired to the positive and ground of your signal wire. 1 per side. (Not included) Polarity sensitive (The lights only work one ...
Part No: 2x 3157-80W-W
3157, 3057, 3457, 4157 and compatible also with 3156, 3056 3356 3456 Fits many tail lights, reverse bulbs, and park lamp lights on American Vehicles Brighter than the factory bulb Dual Mode: On Low, On Bright 18x SMD 2835 SMD Chipset are super ...
Part No: 2x 3157-W
3156 3056 3356 3155 Type - Single Contact Bottom (Compatible with 3157 ONLY for SINGLE MODE ON/OFF such as Backup bulbs on vehicles
Best to use as a backup replacement bulb for flashing when you put your vehicle in ...
Part No: 2x 3156-FLASH-W
1156 Type - Single Contact ...
Part No: 2x 1156-FLASH-R